Table of Contents
Advertisement
TM
2.9 SLI
, 3-Way SLI
Guide
his motherboard supports NVIDIA
TM
SLI
(Scalable Link Interface) technology that allows you to install up to three
identical PCI Express x16 graphics cards. Currently, NVIDIA
TM
SLI
technology supports Windows
Requirements
1. You should only use identical SLI
2. Make sure that your graphics card driver supports NVIDIA
the drivers from the NVIDIA
3. Make sure that your power supply unit (PSU) can provide at least the minimum power
your system requires. It is recommended to use a NVIDIA
®
the NVIDIA
website for details.
2.9.1 Installing Two SLI
TM
TM
, 4-Way SLI
and Quad SLI
®
TM
SLI
, 3-Way SLI
®
7 / 7 64-bit / 8 / 8 64-bit / 8.1 / 8.1 64-bit OS.
TM
-ready graphics cards that are NVIDIA
®
website: www.nvidia.com
TM
-Ready Graphics Cards
Step 1
Insert one graphics card into PCIE7 slot
and the other graphics card to PCIE3 slot.
Make sure that the cards are properly
seated on the slots.
Step 2
If required, connect the auxiliary power
source to the PCI Express graphics cards.
X99 WS-E/10G / X99 WS-E
TM
Operation
TM
TM
, 4-Way SLI
and Quad
®
TM
SLI
and Quad
®
certiied.
®
TM
SLI
technology. Download
®
certiied PSU. Please refer to
41
Advertisement
Table of Contents
