Installing Three Sli Tm -Ready Graphics Cards - ASROCK TRX40 CREATOR User Manual

TRX40 Creator
TM
2.8.2 Installing Three SLI -Ready Graphics Cards
Step 1
Insert one graphics card into PCIE1 slot,
another graphics card to PCIE3 slot, and
the other graphics card to PCIE4 slot.
Make sure that the cards are properly
seated on the slots.
Step 2
Connect the auxiliary power source to the
PCI Express graphics card. Please make
sure that both power connectors on the
PCI Express graphics card are connected.
Repeat this step on the three graphics
cards.
Step 3
Align and insert the bridge card to the
goldfingers on each graphics card. Make
sure the bridge card is firmly in place.
39