Sli Tm And Quad Sli; Tm Operation Guide; Installing Two Sli; Tm -Ready Graphics Cards - ASROCK X99M Extreme 3 Manual

TM
2.8 SLI and Quad SLI
his motherboard supports NVIDIA
Interface) technology that allows you to install up to three identical PCI Express
x16 graphics cards. Currently, NVIDIA
®
Windows 7 / 7 64-bit / 8 / 8 64-bit / 8.1 / 8.1 64-bit OS.
Requirements
1. You should only use identical SLI
2. Make sure that your graphics card driver supports NVIDIA
the drivers from the NVIDIA
3. Make sure that your power supply unit (PSU) can provide at least the minimum power
your system requires. It is recommended to use a NVIDIA
®
the NVIDIA website for details.

2.8.1 Installing Two SLI

TM
Operation Guide
® TM
SLI and Quad SLI
® TM
SLI and Quad SLI
TM
-ready graphics cards that are NVIDIA
®
website: www.nvidia.com
TM
-Ready Graphics Cards
Step 1
Insert one graphics card into PCIE1 slot
and the other graphics card to PCIE3 slot.
Make sure that the cards are properly
seated on the slots.
Step 2
If required, connect the auxiliary power
source to the PCI Express graphics cards.
TM
(Scalable Link
TM
technology supports
®
certiied.
® TM
SLI technology. Download
®
certiied PSU. Please refer to
X99 Extreme3
27