Test Connection - DMX Pandora Setup Manual

4 Once the activation and sign up process is complete, click Continue and you will
return to the Online Control Panel.
5 Select a station and play.
Turn on your amplifier and increase the volume in small increments until you
9
reach your desired listening level.
NOTE: Due to normal differences between any previous music player and your new
ProFusion iO you may need to try different volume settings on your amplifier.
ProFusion iO volume is set to 100% from the factory, so adjust your system
slowly and carefully.

TEST CONNECTION

1 Click Administration in the top right corner of the screen and then select the Update tab.
2 Click Test Connection. It may take a few minutes for the four digit install PIN to be
displayed. A message will be displayed if any errors exist.
NOTE: If you receive an error message, please contact us at 800.929.5407.
3 Your Ethernet connection has been successfully connected. Click Zone in the top
right corner of the screen and you are ready to begin using Pandora for business.
Optional Wi-Fi Set Up
NOTE: Your ProFusion iO Pandora must be completely set up and connected to the Online
Control Panel before Wi-Fi setup. Do not remove the Ethernet cable until the Wi-Fi setup is
completed.
CONNECT USB WI-FI ADAPTOR
Ensure your ProFusion iO Pandora is in range of your wireless network.
1
2 Click on the Online Control Panel or press Standby on the remote control.
Press the Power button on the back of the player to the 'off' position.
3
4 Insert the USB Wi-Fi adaptor into the USB port on the back of the player.
NOTE: For best performance, make sure the antenna is clear of obstacles and three feet
away from any large metal objects.
Press the Power button on the back of the player to the 'on' position.
5
6 If your wireless router supports Wireless Protected Setup (WPS), proceed to specific
instructions on page 10. If your router does not support WPS, go directly to the
"configure wireless settings manually" section
ProFusion iO Pandora Quick Start Guide 9