DMX Pandora Setup Manual page 5

Connect
1
If you do not have an existing music player you may skip steps 3 and 4.
Please refer to the cautionary information sheet included with your ProFusion
1
iO Pandora before proceeding.
Adjust the volume on your amplifier or amplified speakers down completely. Then
2
turn off your amplifier, old music player, and/or amplified speakers. You'll be prompted
to increase the volume later.
Disconnect the power and remove all cables from the old player.
3
4 Remove the old music player and its power supply.
5 Place your Profusion iO Pandora in an area with adequate ventilation space.
Connect the cables in this order:
6
A: Ethernet cable to your player and to your available Ethernet port.
B:
White RCA cable to Zone 1/L, red RCA cable to Zone 2/R, and the other end to your
amplifier. If your old music player used RCA cables to connect to the amplifier, you may
be able to reuse them.
C:
The external power adaptor to your player.
CAUTION: Certain parts may cause electrical shock and injury.
IMPORTANT: Please note these important operational instructions and
clarifications.
A B
C
ProFusion iO Pandora Quick Start Guide 5