Advertisement
Factory Radio Removal Process
1
Remove the fuse panel cover.
2
Extract 2x Phillips screws, 1x 10mm bolt from the
drivers side knee cover and unsnap it
3
Extract 2x 9/32" - 7mm screws from the middle
panel and unsnap it.
FULL SIZE TRUCK
4
Extract 2x Phillips screws from instrument panel
cover and remove it. Remove the radio bezel by
unsnapping it.
5
Extract 6x 7/32" - 7mm screws from the factory
radio/HVAC assembly and remove it.
6
Use a cutting tool to trim out the highlighted area as
shown below.
Chevrolet/GMC
˜ 7/13
Advertisement
