Step 1. Follow instructions in your fan manual until you come
to "bulb Installation".
Step 2. Install socket plug into socket.
Step 3. Take the No Light Cap and position the indentations
in the outer rim of the cap so that they line up with the tabs
on the inside surface of the fixture rim.
Step 4. Carefully push the cap up inside the light fixture as
far as it will go and rotate in a clockwise direction until it
falls into the notch for each tab.
This completes the installation of the No Light Cap.
©2004 Casablanca Fan Co.
FOR NEW FAN
www.CasablancaFanCo.com
S3
STEALTH