Upgrade Wizard On Setup Cd - THOMSON TM546 User Manual

Chapter 5
Software Upgrade
Introduction
Starting the Upgrade
82

5.1 Upgrade Wizard on Setup CD

The procedures described in this section are valid only in case:
You run an MS Windows Operating System or Mac OS X.
Your SpeedTouch™ and computer are properly connected through Ethernet.
During the upgrade procedure in most cases configuration settings are backed up by
the wizard and restored after uploading the system software.
To launch the SpeedTouch™ Upgrade Wizard:
Wizard
Insert the Setup CD in your computer's CD-ROM or DVD-ROM drive. The
1
SpeedTouch™ CD menu will pop up automatically.
If not:
Optionally, in the Choose Language window, select the language of your
2
choice and click OK.
The SpeedTouch™ safety instructions will be displayed in your default web
3
browser. Close the window.
Select I have read and I fully understand the Safety Instructions and
4
Regularity Information and click Continue.
In the SpeedTouch™ CD Menu, click SpeedTouch Maintenance.
5
Click Upgrade My SpeedTouch, to start the SpeedTouch™ Upgrade Wizard.
6
See " Upgrade procedure" on page 83
7
In MS Windows:
Click Run on the Start menu and enter the following path:
D:\Setup.exe where D stands for the drive letter of your CD-ROM
or DVD-ROM drive.
On Mac OS X
Double-click the CD icon and then double-click Menu.
to continue.
E-DOC-CTC-20050429-0100 v1.0