Game Or Application Definition - THOMSON TM546 User Manual

4.5.4 Game or Application Definition

Accessing the Game or
Application Definition
page
Overview
Configure
Adding a Port
Translation rule
E-DOC-CTC-20050429-0100 v1.0
Proceed as follows:
In the Toolbox menu, click Game & Application Sharing.
1
In the Pick a task... list, click Modify a game or application.
2
Click the name of the game or application you want to view/change.
3
This page gives you an overview of the port mappings used to allow this service or
game to be initiated from the Internet.
Consult the user's guide or support pages of your application to know which
ports are being used by this application.
A service is made of one or more TCP/UDP port ranges. Each incoming port range
can be translated into a different internal (local network) port range. Port ranges can
be statically assigned to devices or dynamically assigned using an outgoing trigger.
Under:
Game or Application Name you can:
Change the name of the game or application.
Game or Application Definition you can:
Change the TCP/UDP port definition for this game or application.
Proceed as follows:
In the Protocol list, click the protocol the game or application uses.
1
In the Port Range box, type the port range the game or application uses.
2
In the Translate To... box, type the port range to which the SpeedTouch™ has to
3
translate the ports specified under Port Range.
If you want to make a dynamic translation rule you must specify a trigger
4
protocol and port.
As soon as the SpeedTouch™ receives outgoing traffic on this trigger
port, it will activate this translation rule.
Click Apply.
5
Chapter 4
SpeedTouch™ Web Interface
57