Let's Send Email; Sending Email With Tm-D710A/E And Rc-D710 - Kenwood TM-255A Product Manual

7.3 Let's Send Email

With TM-D710A/E and RC-D710 it is possible to transmit email by using the Message function.

7.3.1 Sending Email with TM-D710A/E and RC-D710

First, press [MSG] to show the Message List on the screen. Next, press [NEW] to create a
message on the screen. Enter "EMAIL" to TO: field using the Tuning Control on the panel or the
numeric keypad on the microphone.
Next, enter the email address to which you wish to send email. Leave one space blank after the
address and begin entering the message text. See an example below.
The message can be entered using the Tuning Control on the panel or the numeric keypad on
the microphone. When the message is completely entered, it will be transmitted in an APRS
message. Email is transmitted via the IGate and the APRS server is connected to the Internet.
APRS software
From IGate to Server
Digipeater
Digipeater
Email transmission
Note: You cannot send email from a personal computer to a mobile station.
TM-D710A/E
Figure 7-2 Using Email Function
Figure 7-3 Entering Email Address and Message
TM-D710A/E
Digipeater
Figure 7-4 Transmission Flow for Email
Internet
Server to Internet
APRS Server
7 APRS NETWORKS
Email has been received!
Email software
CONTENTS
33