Adjusting Receive Volume; Adjusting Transmit Level - Kenwood TM-255A Product Manual

8 EchoLink

8.4.6.1 Adjusting Receive Volume

Adjust the receive volume of the announcement audio from the test server.
Select "Adjust Sound Device" > "Playback..." from the Tools pulldown menu.
Figure 8-22 Receive Volume Menu Selection
Adjust the appropriate volume control using the test server announcement.

8.4.6.2 Adjusting Transmit Level

Adjust the level of the transmit audio that is sent from the microphone to the test server.
Select "Adjust Sound Device" > "Recording..." from the Tools pulldown menu.
Figure 8-23 Transmit Level Menu Selection
To transmit, use the "Transmit" button on the EchoLink software screen or the [Space] key on
your computer keyboard. Press the "Transmit" button or [Space] key once to activate the transmit
mode; press it again to return to receive mode.
Figure 8-24 Adjusting Transmit Level
While transmitting, speak into the microphone using a normal level of voice. After returning to
receive, your spoken audio will be repeated back by the test server. Adjust the microphone level
control until the returned audio sounds best. Transmit to the test server and listen to the returned
audio a couple of times. When you have completed setting the input level, press the "Disconnect"
button on the EchoLink software screen to disconnect from the test server.
54 TM-D710A/E
CONTENTS