Calling Alert; Key Lock; Send The Gps Data; Emergency Calls - Kenwood TK-2317 Instruction Manual

CALLING ALERT

The Calling Alert tone alerts party members that you are
making a call. To make a call:
1 Briefly press and hold the key programmed as
[Calling Alert].
• Release the key to end the tone transmission.
2 Press the PTT switch and speak into the microphone in
your normal speaking voice.

KEY LOCK

Press and hold the key programmed as [Key Lock] for
2 seconds to lock the transceiver keys. Press and hold the
[Key Lock] key again to unlock the keys.
• LOCKED
"
are locked.
Note: You can still use the following keys and functions when Key
Lock is activated: [Emergency], [Lamp], [Monitor], [Monitor
Momentary], [Squelch Off], [Squelch Off Momentary], [Key
Lock], PTT.

SEND THE GPS DATA

Press the key programmed as [Send the GPS Data] when the
GPS unit has been installed to send your positioning data to
the base station.

EMERGENCY CALLS

If your transceiver has been programmed with the Emergency
function, you can make emergency calls.
1 Press and hold the key programmed as [Emergency].
• Depending on the delay time programmed into your
transceiver, the length of time you must hold the Emergency
key will vary.
• When the transceiver enters Emergency mode, the transceiver
will change to the Emergency channel and begin transmitting
based on how the transceiver is set up.
24
appears when a key is pressed while the keys
"