Table of Contents
Advertisement
Installation
The system design and installation should follow
accepted industry practice, such as described in the
ASHRAE Handbook and SMACNA.
Minimum service clearance should be provided on
the side of the unit for routine service and component
removal should it become necessary.
Before beginning installation see page 3 for detail on
appropriate service clearances.
Hang Mounting with Hanging Vibration
Isolators
• The hanging isolator kit includes four (4) isolators
and required hardware.
• Locate the support rods as shown in the drawing.
• Assemble each isolator as shown.
A
MiniVent
A
B
450
37.6
26.4
750
43.2
33
All dimensions are in inches.
®
B
C
Electrical and Fan Access Panel
(underside)
C
19.9
23.8
Nut
Hanger bracket,
factory-mounted
Hanging Vibration Isolator Assembly
MiniVent-450
Nut
Hanger bracket,
factory-mounted
Hanging Vibration Isolator Assembly
MiniVent-750
Energy Recovery Ventilator
3/8-inch threaded rod,
provided by others
Small flat washer
Big flat washer
Isolator
Big flat washer
Small flat washer
Lock washer
Nut
1/2-inch threaded rod,
provided by others
Lock Washer
Flat Washer
Isolator
Flat Washer
Lock Washer
Nut
5
Advertisement
Table of Contents
