Service Clearances And Access Panel Locations; Intake And Discharge Locations - Greenheck MiniVent Installation, Operation And Maintenance Manual

Service Clearances and Access
Panel Locations
Recommended Service Clearances
The MiniVent requires minimum clearances to perform
routine maintenance, such as filter replacement, energy
wheel cassette and fan inspection. Fan and motor
assemblies, energy recovery
wheel cassette and filter
sections are provided with
a service door or panel for
proper component access.
Access Panel Locations
1. • Outdoor and exhaust fans and motor
• Electrical connection
2. • Energy wheel cassette
• Internal filters
1
B
Discharge
Side "A"
Intake
Side "A"
4 Energy Recovery Ventilator
MiniVent A
450
25
750
31
All dimensions are in inches.
2
A
Discharge
Side "B"
Intake
Side "B"
1
2

Intake and Discharge Locations

Intake and discharge locations are shown. Both intake
locations are capable of being field relocated to suit
installation needs (see optional locations).
B
15
21
Discharge
Side "A"
Changing the discharge location
-
Step 1 Remove the
metal cover for optional
intake by unfastening the
four sheet metal screws
holding it in place.
Step 2 - Hand bend
flanges out to form a
duct collar in the newly
uncovered intake opening.
Step 3 - Hand bend
flanges in on original intake
and replace metal cover
removed in Step 1.
Intake Side "A" (optional)
Intake
Side "A"
Discharge
Side "B"
Intake
Side "B"
Intake Side "B" (optional)
Intake
Cover
Intake Duct
Collar
®