Wired Remote - Mitsubishi Electric Mr.SLIM PCA-RP50KAQ Service Manual

4-4. WIRED REMOTE CONTROLLER (OPTION) <PAR-21MAA>
* The functions which can be used are restricted according to the model.
Display Section
For purposes of this explanation,
all parts of the display are shown.
During actual operation, only
the relevant items will be lit.
Identifies the current operation
Shows the operating mode, etc.
*Multilanguage display is available.
"Centrally Controlled" indicator
Indicates that operation from the
remote controller has been prohib-
ited by a master controller.
"Timer is Off" indicator
Indicates that the timer is off.
Temperature Setting
Shows the target temperature.
Operation Section
Temperature setting buttons
Down
Up
Timer Menu button
(Monitor/Set button)
Mode button (Return button)
Set Time buttons
Back
Ahead
Timer On/Off button
(Set Day button)
Opening the
cover
OCH491C
Day-of-Week
Shows the current day of the week.
Time/Timer Display
Shows the current time, unless the simple or Auto Off
timer is set.
If the simple or Auto Off timer is set, the time to be
switched off is shown.
TIME SUN MON TUE WED THU FRI SAT
TIMER
AFTER
ERROR CODE
°F°C
°F°C
ONLY1Hr.
Up/Down Air Direction indica- Room Temperature display
tor
Shows the room temperature. The room
temperature display range is 8-39°C.
The indicator shows the direc-
The display blinks if the temperature
tion of the outcoming airflow.
is less than 8°C or 39°C or more.
"One Hour Only" indicator
Louver display
Displays if the airflow is set to
Indicates the action of the swing louver.
low or downward during COOL
Does not appear if the louver is not
or DRY mode. (Operation varies
running.
according to model.)
The indicator goes off in 1 hour,
when the airflow direction
also changes.
Indicates that the power is on.
TEMP.
MENU ON/OFF
BACK MONITOR/SET DAY
PAR-21MAA CLOCK
Hr ON
AFTER OFF
FUNCTION
FILTER
WEEKLY
SIMPLE
AUTO OFF
(Power On indicator)
ON/OFF
FILTER
CHECK TEST
OPERATION
CLEAR
Built-in temperature sensor
8
"Sensor" indication
Displays when the remote controller
sensor is used.
"Locked" indicator
Indicates that remote controller but-
tons have been locked.
"Clean The Filter" indicator
To be displayed on when it is time to
clean the filter.
Timer indicators
The indicator comes on if the corre-
sponding timer is set.
Fan Speed indicator
Shows the selected fan speed.
Ventilation indicator
Appears when the unit is running in
Ventilation mode.
ON/OFF button
Fan Speed button
Filter button
(<Enter> button)
Test Run button
Check button (Clear button)
Airflow Up/Down button
Louver button
( Operation button)
To return operation
number
Ventilation button
( Operation button)
To go to next operation
number