Noting Your Devices - Kenwood KRF-X7775D User Manual

Chapter One : Connecting Your Devices
Jack Set
PHONO
CD1
MD/TAPE1
CD2/TAPE2 MONITOR
CD-R
MONITOR OUT
(TV on Remote Control unit)
VIDEO1
VIDEO2
VIDEO3
DVD
Use this table and the diagram on the preceding page to
plan your connections before you make them, or use it to
record your connections as you make them.
If you will be connecting a DVD player or other compo-
nent with a digital output, please refer to the following chart
before choosing a video jack set:

Noting Your Devices

Device Manufacturer
If your digital
cable is...
coaxial
optical
Model #
You will need this information later, when you set up your
Choose this jack
Remote control unit (see "Identifying Components For re-
set...
mote control unit Control" on page 40). Recording this in-
formation now will save you additional trips behind your
DVD, VIDEO2 or 3
home entertainment cabinet. You will fill in the Setup Code
column when you are setting up Remote control unit.
DVD
When playing Dolby Digital
multichannel configuration, the connected audio signal
should be the digital signal.
*
When playing a LaserDisc recorded in the Dolby Digital for-
mat, connect the AC-3 RF output to the receiver (See page 26).
Setup Code
3
* or DTS-encoded software in