Download Print this page

Antenna Installation - Kenwood CX-DAB1 Installation Manual

Dab antenna unit
Hide thumbs

Advertisement

Determining the antenna installation location
When installing the antenna on the left side
Front pillar
Earth sheet
Amplifier B
Where the earth sheet of Amplifier B can be pasted on the metal part of the front pillar.
1
• *

Antenna Installation

Check the installation location.
1
Wipe the area where antenna film A,
2
amplifier unit B, and earth sheet are
pasted with the included cleaner D.
The coating on the metal surface need not
be removed.
Wait until the glass surface is completely
dry before pasting.
If the glass surface is cold, such as during
winter, warm it with defroster or dryer.
Remove the separator (tag I) of antenna
3
film A horizontally and paste the
antenna on the front glass.
Remove the separator gently.
Do not touch the pasting surface
(adhesive side) of the antenna film A.
Remove the separator (tag II) of
4
antenna film A vertically and paste
the antenna gently while applying
pressure.
4
|
English
150 mm
1
70 mm *
Antenna film A
When installing the antenna on the right
side
Amplifier B
150 mm
Antenna film A
After pasting, rub the element in the
5
glass surface in the direction of the
arrow shown in the figure to bond it.
Remove the application film (tag III).
6
Do not touch the feeder terminal of the
element. Also, do not apply any glass
cleaner.
Earth sheet
70 mm *
1
Feeder terminal

Hide quick links:

Advertisement

loading

  Also See for Kenwood CX-DAB1

  Related Manuals for Kenwood CX-DAB1