Download  Print this page

Kenwood CX-DAB1 Installation Manual

Dab antenna unit.
Hide thumbs
   

Advertisement

CX-DAB1
DAB antenna unit

INSTALLATION MANUAL

Antenne DAB
MANUEL D'INSTALLATION
Bluetooth-Antennengerät
INSTALLATION-HANDBUCH
DAB-antenne
INSTALLATIEHANDLEIDING
Unità antenna DAB
MANUALE PER L'INSTALLAZIONE
Unidad de antena DAB
MANUAL DE INSTALACIÓN
Unidade de antena DAB
MANUAL DE INSTALAÇAO
© 2012 JVC KENWOOD Corporation
B64-4972-00/00 (W)

Advertisement

Table of Contents

   Also See for Kenwood CX-DAB1

   Related Manuals for Kenwood CX-DAB1

   Summary of Contents for Kenwood CX-DAB1

  • Page 1: Installation Manual

    DAB antenna unit INSTALLATION MANUAL Antenne DAB MANUEL D’INSTALLATION Bluetooth-Antennengerät INSTALLATION-HANDBUCH DAB-antenne INSTALLATIEHANDLEIDING Unità antenna DAB MANUALE PER L’INSTALLAZIONE Unidad de antena DAB MANUAL DE INSTALACIÓN Unidade de antena DAB MANUAL DE INSTALAÇAO © 2012 JVC KENWOOD Corporation B64-4972-00/00 (W)
  • Page 2: Specifications

    Part list skills and experience. For safety’s sake, leave this work to professionals. If you experience problems during installation, consult your Kenwood dealer. ■ This film antenna is exclusively for use inside the vehicle. A ......DAB antenna film (×1) ■...
  • Page 3: Installation Overview

    Installation overview Control unit DAB antenna A/ B DAB antenna input (SMB connector) Antenna cable (3.5 m) ■ The antenna should be installed on the passenger side for safety. Use cord clamper c to secure the antenna to the pillar at several locations. ■...
  • Page 4: Antenna Installation

    Determining the antenna installation location When installing the antenna on the left side When installing the antenna on the right side Front pillar Amplifier B Earth sheet 150 mm 150 mm Earth sheet 70 mm * Antenna film A Antenna film A 70 mm * Amplifier B Where the earth sheet of Amplifier B can be pasted on the metal part of the front pillar.
  • Page 5 Match the protrusion of the amplifier B Wire the antenna cables. Use cord clamper C to secure the with the 5 on the antenna film A and ■ antenna to the pillar at several locations. paste. ■ Notes Do not touch the feeder terminal or the Take the following precautions when pasting surface (adhesive side) of the passing the antenna cable inside the front...

Comments to this Manuals

Symbols: 0
Latest comments: