Applying Labels To Back Cover Assembly - Lenovo ThinkPad 10 Hardware Maintenance Manual

Applying labels to the back cover assembly:
The new back cover assembly is shipped with a kit containing labels of several kinds. Apply those labels
when you replace the back cover assembly. For the labels that are not shipped with the new back cover
assembly, peel them off from the old back cover assembly, and then adhere them to the new one.
The following illustration shows the location of each label.
For models that are equipped with a smart card reader
For models that are not equipped with a smart card reader
1
Wireless IMEI label
3
Home label
5
FCC label
7
GEO label
If the FCC label is attached to a part that is replaced, return the old part with the label attached to the
customer, or provide a letter to the customer stating what the label was originally on the computer and what
the label part number, serial number, and product key were.
1 2
3
4
1 2
3
4
2
Asset tag
4
Factory ID label
6
Factory ID label
8
CECP label
.
Chapter 7 Removing or replacing a FRU
51