1100 Keyboard Dock Back Cover (On Select Models) - Lenovo MIIX 3-1030 Hardware Maintenance Manual

1100 Keyboard dock back cover (on select models)

Figure 10. Removal steps of keyboard dock back cover (on select models)
Pry up both ends of the rubber strip in the direction shown by arrows
Open the two rubber feet in the direction shown by arrows
Note: The two rubber feet are connected to the dock back cover (see illustration
below, marked in the red). Do not use too much force when opening the
two rubber feet, otherwise they might break off from the back cover.
Then remove the four screws
Step Screw (quantity)
M2.0 × 2.5, flat-head, nylok-coated, Rubber Foot (4) Black
4
.
4
Lenovo MIIX 3-1030
and
1
.
3
Color Torque
1.6~2 kgf*cm
.
2
43