1180 Wireless-Wan Antenna Assembly - Lenovo ThinkPad 10 Hardware Maintenance Manual

Cable routing: When you install the antenna assembly, route the cables as shown in the following
illustration. Ensure that the cables do not get in contact with the system board and are not subject to any
tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken.
When installing: Ensure that the connector is attached firmly.

1180 Wireless-WAN antenna assembly

For access, remove these FRUs in order:
• "1010 Back cover assembly and smart card reader" on page 44
• "1090 Camera-card cable" on page 56
• "1140 NFC card and NFC cable" on page 62
Removal steps of the wireless-WAN antenna assembly
Note: The wireless-WAN antenna assembly is only available on some models.
68
Hardware Maintenance Manual