Connection Of Other Accessories; (Commercially Available Parts) - Kenwood HM-535 Instruction Manual

Connection of Other Accessories

CAUTION
Note on Connection
Connect the components as shown in the dia-
gram. Only plug the power cord into a power
outlet once connections are completed.
* DIGITAL OUT jack (OPTICAL)
The DIGITAL OUT jack (OPTICAL) outputs the CD
signal.
The CD signal can be recorded in digital format by
connecting a recorder to the DIGITAL IN jack
(OPTICAL).
VCR, Analog turntable with built-in
RIAA equalizer (optional P-110), etc.
Audio output
Audio cord
Optical fiber cable
Digital input
MD recorder or DAT etc.
÷ In case an associated system component is connected, also read the instruction manual of the component.
÷ Be sure to insert all connection cords securely. If their connections are imperfect, the sound may not be
produced or noise may interfere.
÷ Before plugging or unplugging a connection cord, be sure to unplug the power cord from the wall AC outlet. If
connection cords are plugged or unplugged with the power cord left plugged in, malfunction or damage may result.
8 EN

(Commercially Available Parts)

FM outdoor antenna
Lead the 75 coaxial cable connected to the FM out-
door antenna into the room and connect it to the
FM 75
tenna after an outdoor antenna has been installed.
- +
L
R
FRONT
SPEAKERS
(6-16 )
R L
AUX
INPUT
DIGITAL
OUT
OPTICAL
*
DIGITAL
OUT
OPTICAL
cap
terminal. Please remove the indoor an-
Antenna adaptor
AM
GND
(Commercially
Available Parts)
FM
75
ANTENNA
AM
GND
FM
75
ANTENNA
POWER cord
TO WALL AC OUTLET
System connection
FM outdoor antenna