Playing Discs - Sony DVP-NC600 Operating Instructions Manual

Playing Discs
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
POWER
Power indicator
Dw P
AUDIO
DISC SKIP
DISC SKiP
1
Turn on your TV.
2 Switch the input selector on the TV
to the
player.
When using an amplifier (receiver)
Turn on the amplifier (receiver) and
.select the
appropriate
channel.
3
Press POWER on the
player.
The player enters standby mode and the
power indicator lights up in red.
4
Press P on the
player,
and place a
5
disc on the disc tray.
The player automatically turns on and the
power indicator lights up in green.
To place other discs on the tray, press
DISC SKIP and place the discs in the
order you want to play them.
Each time you press DISC SKIP, the disc
tray turns so you can place the discs on
the empty compartments. The player
plays from the last disc placed on the
tray.
With the playback
side facing down
Press D.
compartment
number
The disc tray closes, and the player starts
playback (continuous play). Adjust the
volume on the TV or the amplifier
(receiver).
After following Step 5
Depending on the disc, a menu may appear
on the TV screen. You can play the disc
interactively by following the instructions on
the menu. DVD (page 36), VIDEO CD (page
37).
To turn on the player
Press POWER on the player. The player
enters standby mode and the power indicator
lights up in red. Press I/fi on the remote. The
player turns on and the power indicator lights
up in green. In standby mode, the player also
turns on by pressing 4 on the player or by
pressing D.
32