Settings For The Sound (Audio Setup) - Sony DVP-NC600 Operating Instructions Manual

n
PAUSE MODE (DVD
only)
Selects the picture in pause mode.
The picture, including subjects that
move dynamically, is output with no
jitter. Normally, select this position.
The picture, including subjects that
do not move dynamically, is output in
high resolution.
n
PARENTAL CONTROL +
(DVD
only)
Sets a password and playback limitation level
for DVDs with playback limitation for
children. For details, see "Limiting playback
by children (Parental Control)" (page 56).
WTRACK SELECTION (DVD
only)
Gives the sound track which contains the
highest number of channels priority when
you play a DVD on which multiple audio
formats (PCM, DTS or Dolby Digital format)
are recorded.
OFF
No priority given.
AUTO Priority given.
l
When you set the item to "AUTO," the language
may change. The "TRACK SELECTION" setting
has higher priority than the "AUDIO" settings in
"LANGUAGE SETUP" (page 63).
l
If you set "DTS" to "OFF* (page 68), the DTS sound
track is not played even if you set "TRACK
SELECTION" to "AUTO."
l
If PCM, DTS and Dolby Digital sound tracks have
the same number of channels, the player selects
PCM, DTS and Dolby Digital sound tracks in this
order.
l
Depending on the DVD, the audio channel with
priority
may
be predetermined. In this case, you
cannot give priority to the DTS or Dolby Digital
format by selecting "AUTO."
Settings for the Sound
(AUDIO SETUP)
"AUDIO SETUP" allows you to set the
sound according to the playback and
connection conditions.
Select "AUDIO SETUP" in the Setup
Display. For details on using the display, see
"Using the Setup Display" (page 62).
The default settings are underlined.
WAUDIO ATT
(attenuation)
If the playback sound is distorted, set this
item to "ON." The player reduces the audio
output level.
This function affects the output of the LINE
OUT L/R (AUDIO) l/2 jacks.
Turns off the audio attenuation.
Normally, select this position.
Reduces the audio output level so that
Select this when the playback sound
66