Panasonic GSM EB-GD95 Service Manual page 47

8. Select TRIM OTHER and make a note of the RSSI MCH GSM reading.
9. Press ESC.
10. At the Channel box, press F6 to program data.
11. Select TRIM RSSI and press ENTER.
12. Highlight RSSI Mch GSM and press ENTER.
13. Make the following calculation:
RSSI Offset Value (step 8) + reading noted in step 6.
Enter the result in to the RSSI Mch field.
14. Press ENTER.
15. Press ESC.
16. Measure the RSSI level again by highlighting the RSSI dBm field again and press ENTER.
17. Repeat steps 6 to 16 for both low / bottom and high / top channels.
MCUK010801C8
Service Manual
Channel E-GSM
Bch (E-GSM) 975
Lch 1
Mch 70
Hch 124
Section 7
– 43 –
ADJUSTMENT PROCEDURES
Frequency
925.2 MHz
935.2 MHz
949.0 MHz
959.8 MHz
Issue 1
Revision 0