Emptying The Water Reservoir - Miele B 895 D Operating Instructions Manual

^ It is advisable to switch off the steam
function during an interruption to
ironing and at the end of ironing.

Emptying the water reservoir

,
Before emptying the reservoir
make sure that the water in it has
cooled down and that the roller has
cooled down.
The reservoir should be emptied after
each use to avoid damage from
deposits present in the water (e.g.
chlorine, calcium or copper).
^ Unscrew the water reservoir cap.
^ To make it easier use the screw-on
funnel.
^ Slowly fold the iron up and at the
same time hold a suitable container
(e.g. measuring jug) underneath the
reservoir opening to catch the water.
^ When all the water has run out
replace the cap.
^ The screw-on funnel can be stored
on the cable holder when not in use.
Steam
15