Listening To Radio Broadcasts; Tuning Radio Stations - Kenwood KRF-V8030D Instruction Manual

Recording music in M-REC MODE
DIMMER
1 Use the input selector to select the source (CD, DVD,VIDEO2, or
VIDEO3) you want to record.
2 Set the cassette deck to record.
3 Play the source to be recorded.
4 Press and hold the DIMMER key for more than 2 seconds to
select the M-REC MODE.
The mode changes every 2 seconds as shown below.
•
1REC MODE off :
2A-REC MODE :
3M-REC MODE :
5 Play the source from the beginning and start recording.
If the audio reproduction stops in the middle due to change in the
•
input signals, etc., press the DIMMER key.
Recording
INPUT SELECTOR
The digital input record mode is
switched off.
The digital input signals (DTS,
Dolby Digital or PCM) are identi-
fied automatically and converted
into stereo signals that are ready
for recording.
The input signal type at the mo-
ment this mode is selected is held
throughout this mode.
FM AUTO SOUND DIGITAL
AM PRO LOGIC S.DIRECT
MHz 3 STEREO MONITOR
TUNED
kHz DOWN MIX DSP
FM AUTO SOUND DIGITAL
AM PRO LOGIC S.DIRECT
MHz 3 STEREO MONITOR
kHz DOWN MIX DSP TUNED

Listening to radio broadcasts

The receiver can store up to 40 stations in the memory and recall them by
one-touch operation.

Tuning radio stations

MULTI CONTROL
MUSIC
TUNING2/3
1
Use the INPUT SELECTOR knob or MUSIC key to select the
tuner.
2
Use the BAND key to select the desired broadcast band.
Each press switches the band
as follows:
1 FM
2 AM
AUTO
MEMO
ST.
3
Use the AUTO key to select the desired tuning method.
AUTO
MEMO
Each press switches the tuning method as follows:
ST.
1 AUTO lit (auto tuning)
2 AUTO not lit (manual tuning)
• Normally, set to "AUTO" (auto tuning). If the radio waves are weak
and there is a lot of interference, switch to manual tuning. (With
manual tuning, stereo broadcasts will be received in monaural.)
4
Use the MULTI CONTROL knob ( 2 / 3 key) to select the
station.
Auto tuning : The next station is tuned automatically.
Manual tuning : Turn the knob (press the key) to select the
INPUT SELECTOR
BAND AUTO
BAND
AUTO
"AM" or "FM" indicator
FM AUTO SOUND
AM PRO LOGIC
MHz 3
kHz DOWN MIX
"AUTO" indicator lights.
FM AUTO SOUND
AM PRO LOGIC
MHz 3
kHz DOWN MIX
Frequency
Lights when a broadcast is
display being received in stereo.
FM AUTO SOUND
AM PRO LOGIC
MHz 3
kHz DOWN MIX
"TUNED" is displayed
when a station is received
desired station.
19
DIGITAL AUTO
S.DIRECT MEMO
ST.
STEREO MONITOR
DSP TUNED
DIGITAL AUTO
S.DIRECT MEMO
STEREO MONITOR ST.
TUNED
DSP
DIGITAL AUTO
S.DIRECT MEMO
STEREO MONITOR ST.
TUNED
DSP