Audio, Video And Ir Connections; Audio Connections; Video Connections; Ir Connections - Elan VIA! dj 4 Installation Manual

E L A N H O M E S Y S T E M S
II.

AUDIO, VIDEO AND IR CONNECTIONS

1. AUDIO CONNECTIONS

a. Wholehouse Audio Distribution—Connect the VIA!dj's ANALOG audio outputs 1, 2 and 3
to any three source inputs on the System6, System12, Z•630 PreAmp Controller or HD
Source Input Card.
b. Home Theater Audio—Connect the VIA!dj's coaxial or optical DIGITAL audio output to a
digital audio input on a A/V receiver, preamp or surround sound processor.

2. VIDEO CONNECTIONS

The VIA!dj has three types of video outputs; all are continuously active.
a. Wholehouse Video Distribution—Connect the VIA!dj's Composite Video Output to a Z•880
Video Controller input. This enables the VIA!dj's composite video signal to be sent to
multiple VIA! Touch Panels and televisions around the home.
b. S-Video—If desired, the S-Video output of the VIA!dj may be connected to a television with
an S-Video input. S-Video signals have certain length restrictions. Consult your television's
instruction manual for details.
c. VGA—If desired, the VGA output of the VIA!dj may be connected directly to a computer
monitor, compatible HDTV, projector or plasma display. Having a monitor located near the
VIA!dj controller can facilitate setup and programming.

3. IR CONNECTIONS

VIA!dj-S:
An IR emitter over the front panel IR window on the dj-S, or a 3.5mm interconnect cable
plugged into the IR input jack on the back of the dj-S, should be connected to the source-
© ELAN Home Systems 2004 • All rights reserved. 09/04
(4 OUTPUT MODEL SHOWN)
INSTALLATION MANUAL
Page 4