Elan VIA! dj 4 Installation Manual

4 output digital music server

Advertisement

Quick Links

VIA!
dj
®
4 Output Digital Music Server
VIA!
dj-S Single
®
Output Digital Music Server

INSTALLATION MANUAL

MANAGE and ACCESS
YOUR MUSIC WITH EASE

Advertisement

Table of Contents
loading

Summary of Contents for Elan VIA! dj 4

  • Page 1: Installation Manual

    VIA! ® 4 Output Digital Music Server VIA! dj-S Single ® Output Digital Music Server INSTALLATION MANUAL MANAGE and ACCESS YOUR MUSIC WITH EASE...
  • Page 2: Table Of Contents

    TECHNICAL SUPPORT ..........14 Page 1 © ELAN Home Systems 2004 • All rights reserved. 09/04...
  • Page 3: The Via!Dj Audio & Video Outputs

    • If you wish to once again view the album details of the music you have selected, simply press Active. The Active button re-syncs the video display to the audio output selected in your zone. © ELAN Home Systems 2004 • All rights reserved. 09/04 Page 2...
  • Page 4: The Via!Dj Output Screen

    Adds track to an existing playlist ELAN Zone volume up and down Randomly plays tracks from albums, genres and playlists Return to VIA! Graphics Repeats the selected album, genre or Play playlist Page 3 © ELAN Home Systems 2004 • All rights reserved. 09/04...
  • Page 5: Audio, Video And Ir Connections

    An IR emitter over the front panel IR window on the dj-S, or a 3.5mm interconnect cable plugged into the IR input jack on the back of the dj-S, should be connected to the source- © ELAN Home Systems 2004 • All rights reserved. 09/04 Page 4...
  • Page 6: Telephone And Ethernet Connections

    NOT FROM ALL ZONES. b. System6 (S6)/Z•880 connections An ELAN Dual IR Emitter can be plugged into the S6’s ‘ALL’ port, and the emitters placed over the IR windows of the VIA!dj and the Z•880. Another alternative would be to use a ‘Y’...
  • Page 7: Built-In Dial-Up Modem Connections

    • Read the Terms and Conditions screen. Note the current cost of using the built-in Internet account service. This rate is subject to change. • Press ✔Accept if you wish to continue © ELAN Home Systems 2004 • All rights reserved. 09/04 Page 6...
  • Page 8: B) Using An Existing Internet Account

    In order to properly configure the VIA!dj to work with a broadband connection, the following settings have to be entered either automatically (DHCP enabled router) or manually. • IP Address • IP Mask • Gateway • IP DNS To enter this information: Page 7 © ELAN Home Systems 2004 • All rights reserved. 09/04...
  • Page 9: Router Or Gateway With Dhcp Server Software

    VIA!dj does not conflict with IP addresses already assigned to other devices. The necessary information can be found on any computer on the network by going to Start>Settings>Control Panel>Network Settings or Network Connections. © ELAN Home Systems 2004 • All rights reserved. 09/04 Page 8...
  • Page 10 8. Using the remote and/or front panel grid, set the first three IP Address numbers to the same first three numbers as the PC, and make the last number unique. For example: Page 9 © ELAN Home Systems 2004 • All rights reserved. 09/04...
  • Page 11: Confirming Via!Dj Network Connection

    PING X.X.X.X where X.X.X.X is the IP Address of the VIA!dj you are troubleshooting. Below is an example of a successful PING response from a properly connected VIA!dj: Successful PING to IP Address 192.168.1.105 © ELAN Home Systems 2004 • All rights reserved. 09/04 Page 10...
  • Page 12: Recording Cds

    VIA!dj ‘stand’ for a period of time while it compresses the recorded data and frees up hard disc space. We suggest that you recommend to your client that, if recording multiple Page 11 © ELAN Home Systems 2004 • All rights reserved. 09/04...
  • Page 13: Dts 5.1 Encoded Cds

    VIA!dj’s IR ‘Code Bank’ in the hope that a different bank will not interfere with other components. To change the IR Code Bank go to System Settings>Controller Settings>Infrared Options>Select> Edit and select a different Code Bank. This will not effect VIA!dj operation. © ELAN Home Systems 2004 • All rights reserved. 09/04 Page 12...
  • Page 14: Remote Diagnostics

    ‘pick up’ the phone before the VIA!dj answers it be turned off or disconnected. Imerge Technical Support can then be contacted (ELAN Tech Support will give you the phone number once we have determined that we can not resolve the issue) and they will call back the VIA!dj.
  • Page 15: Xiva™-Producer

    The MediaLoader package is a collaborative product developed and manufactured by Imerge Ltd. and PowerFile Inc. and is not sold by ELAN Home Systems. It can only be purchased by going to www.powerfile.com/xiva. MediaLoader is available to authorized ELAN or registered XiVA dealers only.
  • Page 16 © ELAN Home Systems 2004 • All rights reserved. 09/04 • P/N: 9900076 REV D...

This manual is also suitable for:

Via! dj-s singleVia! dj

Table of Contents