Table of Contents
Advertisement
Programming
You can programme certain settings on
the hob to suit your personal needs.
Several settings can be changed in
succession.
After starting the programming function,
(programme) and (status) will ap‐
pear in the timer display. On hobs that
have 3 cooking zones, an additional
display appears at the back left.
The programme is displayed in the front
left and rear left cooking zone control
scales.
Example:
Programme 3 =
front left , rear left
Programme 14 =
front left , rear left
The status is displayed in the front right
control scale.
After the programming function is exi‐
ted, an automatic reset is performed.
It is concluded when an indicator light
lights up briefly above the sensor.
Do not turn the cooking zone on until
the reset is concluded.
40
To access programming mode
With the hob turned off, touch the
and sensors at the same time
until the indicator light for the safety
lock flashes.
To set a programme
To set the unit digits, touch the re‐
quired number on the front left con‐
trol scale.
To set the tens digits, touch the re‐
quired number on the rear left con‐
trol scale.
To set the status
Touch the required number on the
front right control scale.
To save the settings
Touch the sensor until the indica‐
tors go out.
To avoid saving the settings
Touch the sensor until the indica‐
tors go out.
Hide quick links:
Advertisement
Table of Contents
