Table of Contents
Advertisement
Disconnecting from the mains
Danger of electrical shock.
After disconnection, ensure the ap‐
pliance cannot be switched back on
by mistake.
To disconnect the appliance from the
mains power supply, do one of the fol‐
lowing depending on installation:
Safety fuses
Completely remove fuses
Automatic circuit breakers
Press the (red) button until the middle
(black) button springs out.
Built-in circuit breakers
Circuit breakers, type B or C: switch
the on-off switch from 1 (on) to 0
(off).
Residual current device (RCD)
Switch the main switch from 1 (on) to
0 (off) or press the test button.
Electrical connection
Mains connection cable
The hob must be connected to the
electrical supply with a special connec‐
tion cable, type H 05 VV-F (PVC insula‐
ted) with a suitable diameter.
Please see wiring diagram for connec‐
tion. (N.B. This appliance is supplied
single phase only in the UK / AUS / NZ).
See the data plate on the hob for the
correct voltage and frequency.
Connecting the mains cable
Danger of electrical shock.
The mains connection cable must be
fitted by a suitably qualified and
competent person in accordance
with current local and national safety
regulations.
The wires in the mains cable are col‐
oured in accordance with the follow‐
ing code:
Green/yellow = earth
Blue = neutral
Brown = live
The earth lead must be connected to
the point marked .
If the mains cable needs to be replaced
it must be replaced with a special con‐
nection cable, type H 05 VV-F (PVC-in‐
sulated), available from Miele.
The connection data is quoted on the
data plate.
63
Hide quick links:
Advertisement
Table of Contents
