Executing An Automatic Operation - Kenwood KR-V888D Instruction Manual

4 4

Executing an automatic operation

1
Press the MACRO key.
2
Execute the macro play.
MACRO
Press the VIDEO, AUDIO, or TV
key to execute the correspond-
ing macro play.
AUDIO
VIDEO TV
Getting the most from your remote control
POWER
MACRO SHIFT
AUDIO
VIDEO TV
8
P. CALL P. CALL
BAND
4 6 ¢
7
REC GUIDE
TUNING/SKIP VOLUME
MUTE
LISTEN
SUBWOOFER MODE SOUND
FUNCTION
SETUP
SHIFT
MENU THEME FAV
1 2 3
TV/SAT/VID INFO ALT AUD
4 5 6
Keys or controls used in this operation.
+100 REPEAT RANDOM
7 8 9
DISPLAY
+10 0 ENT
Go to step 2 within 3 seconds.
• "MACRO" appears in the front panel and on-screen display and the pre
programmed macro is performed:
VIDEO = "MACRO 1", AUDIO = "MACRO 2", TV = "MACRO 3"
• The remote control flashes once for each command output.
• The remote control will output OSD information to tell you the status
of the macro.
• Some devices take up to 1 second to power on. The macro function has
an automatic delay after any power function output.
• Pressing a button other than AUDIO, VIDEO, or TV cancels the macro
program mode.
When VIDEO is pressed
MACRO 1
SP. A
KR-V888D (En/T)