Executing An Automatic Operation - Kenwood VR-510 Instruction Manual

Audio video surround receiver

Hide thumbs Also See for VR-510:

Service manual (35 pages)

Service manual (35 pages)

Table Of Contents

Table of Contents

Press the MUSIC, MOVIE, or TV key to select the macro

location. (MACRO1, 2, and 3 respectively)

• You can store up to 3 different macros, one at each key:

MUSIC = "MACRO 1", MOVIE = "MACRO 2", TV = "MACRO 3"

• Pressing a key other than MUSIC, MOVIE, or TV cancels the macro

program mode.

MACRO1

Select MACRO

When MUSIC is pressed.

Press the keys to be operated in order.

EXAMPLE:

This example shows you how to create a macro that; turns on the TV,

sets the TV to the appropriate input, selects the receiver's input selector

to LD, and turns on the LD player. All you have to do is insert the laser

disc!

1 Press the TV key, then press the AV POWER

on the TV.

2 Press the F. SHIFT key, then press the "3" (INPUT SEL.) key

to set the TV to the appropriate video input.

3 Press the MOVIE key to select the LD player registered at

VIDEO 2.

4 Press the AV POWER

• Make sure you start the next operation within 8 seconds of complet-

ing the previous one. If more than 8 seconds elapses between any two

steps, exit the macro programming mode.

• In order to allow verification of the remote control mode, the name of

the selected input appears in the receiver's display when the MUSIC,

MOVIE, or TV key is pressed. When the MUSIC or MOVIE key is

pressed the receiver's input also changes.

Press the MACRO key.

• The macro is stored at the locations specified in step 3. If another

macro was previously stored at the same location, it is erased.

Repeat steps 1 through 5 to program up to 3 macros.

This completes the macro programming procedure.

key to turn

key to turn on the LD player.