Product & Cabinet Dimensions - Sears 30" GAS SLIDE-IN RANGE Installation Instructions Manual

30" GAS SLIDE-IN RANGE INSTALLATION INSTRUCTIONS
Product Dimensions
Do not
install the unit in the
cabinet before reading
next two pages.
A. HEIGHT B.
(Under WIDTH
Cooktop)
35 7/8" 30"
(91,1 cm) (76,2 cm) 31 5/16" (79,5 cm)
36 5/8" Kenmore ELITE:
(93 cm) 31½" (80 cm)
NOTES:
1
Do not pinch the power supply cord or flexible gas conduit between the range and the wall.
2
Do not seal the range to the side cabinets.
3
24" (61 cm) minimum clearance between the cooktop and the bottom of the cabinet when the
bottom of wood or metal cabinet is protected by not less than 1/4" (0,64 cm) flame retardant
millboard covered with not less than No. 28 MSG sheet metal, 0,015" (0,4 mm) stainless
steel, 0,024" (0,6 mm) aluminum, or 0,020" (0,5 mm) copper.
30" (76,2 cm) minimum clearance when the cabinet is unprotected.
4
For cutouts below 22 7/8" (58,1 cm), appliance will slightly show out of the cabinet.
5
Kenmore Models: Allow at least 19¼" (48,9 cm) clearance for door depth when it is open.
Kenmore ELITE Models: Allow at least 20" (50,8 cm) clearance for door depth when it is
open.
(Models with Sealed Top Burners)
Door Open
(see note 5)
C. COOKTOP D. TOTAL DEPTH
WIDTH TO FRONT OF
RANGE
Kenmore: 28 5/16"
(71,9 cm)
2 1 ¾ "
c m )
( 5 5 . 2 5
D
B
E. CUTOUT WIDTH F. CUTOUT DEPTH
(Countertop and
cabinet)
30±1/16" 21 3/4" (55,2 cm) Min.
(76,2±0,15 cm) 22 1/8" (56,2 cm) Max
24" (61 cm) Min. with
3
C
A
Side
Panel
G. HEIGHT
OF COUNTERTOP
36 5/8" (93 cm) Max.
35 7/8" (91,1 cm)
backguard