Motor Protection Filter - Philips FC8732 User Manual

Hide thumbs Also See for FC8732:
Table of Contents

Advertisement


If there is any dirt on the inside of the case, empty the case over a dustbin.
5
If necessary, clean the filter cylinder case with cold tap water and some washing-up
liquid (Fig. 20).
6
If you want to wash the filter cylinder, wash it thoroughly with only water.
Do not use any soap, washing-up liquid or other detergent to clean the filter cylinder. Let the filter
cylinder dry completely before you reinsert it into the case.
7
Unlock the filter cylinder lock and put the filter cylinder back into the filter cylinder case.
8
Put the filter cylinder case back into the dust bucket and put the dust bucket back into the
appliance.

Motor protection filter

Clean the motor protection filter every time you clean the filter cylinder case.
1
Take the motor protection filter out of the appliance (Fig. 21).
Clean the filter by tapping the dust out of it over a dustbin.

Tap the dust out of the filter over a dustbin.
If the motor protection filter is very dirty, you can also rinse it with cold tap water.
Do not use washing-up liquid or any other cleaning agent to clean the motor protection filter!

Press the clean filter firmly back into the filter compartment to ensure that it is properly
placed. (Fig. )
Super Clean Air HEPA 12 filter
This appliance is equipped with the Super Clean Air HEPA 12 filter. This filter is able to remove
99.5% of all particles down to 0.0003mm in size from the outlet air. This not only includes normal
household dust, but also harmful microscopic vermin such as dust mites and their excrements, which
are well-known causes of respiratory allergies.
-
Replace the Super Clean Air HEPA 12 filter every six months.
1
Open the filter grille (Fig. 23).

Remove the old filter (Fig. 24)

Insert the new filter into the appliance (Fig. 25).

Close the filter grille ('click') (Fig. 26).
storage
1
Switch off the appliance and remove the mains plug from the wall socket.

Press the cord rewind button to rewind the mains cord (Fig. 27).

Insert the ridge on the nozzle into the parking slot to attach the nozzle to the appliance.
Store the appliance in horizontal position, with all wheels touching the floor. (Fig. 12)
Ordering accessories and filters
If you have any difficulties obtaining filters or other accessories for this appliance, contact the Philips
Consumer Care Centre in your country or consult the worldwide guarantee leaflet.
-
Philips filter cylinders are available under type number FC8047/02.
-
Super Clean Air HEPA 12 filters are available under type number FC8044.
English
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents