Attaching The Accessories - Precor PRECISIONSERIES Quick Start Card

EFX 400 Series Assembly Guide
6. Fully tighten the other six fasteners using a ¹ ₂-inch socket wrench.
7. Remove the two rear hex head screws and washers.
Figure 31: Removing the rear screws

Attaching the Accessories

Locate the device holders, bottle holder, and top cover.
To attach the accessories:
1. Place the device holders around the console bracket and slide them together.
Figure 32: Device holder attachment
2. Press them together until they snap into place over the console bracket.
Figure 33: Fit device holder together
16