Installation - For The Configuration W/ Extended Cables 9; Hardware Installation 9 - Vivotek SD8333-E User Manual

Installation - for the Configuration w/ Ex-
tended Cables
Hardware Installation
IMPORTANT:
If your camera comes without the dehumidifier, you
should examine whether the color of the silica gel inside
the chassis has turned dark. If so, you should replace
the desiccant bag.
To replace the desiccant bags:
1. Remove the dome cover by loosening 4 T25 anti-
tamper screws.
2. Replace the desiccant bags by attaching them firmly
to the inside of the chassis.
3. Re-install the dome cover.
Also note the following:
1. Do not install the camera in a raining day.
2. It takes approximately 2 days to suppress the
moisture level to 30% or lower, either using the
desiccant bags or the dehumidifier.
3. Condensation may still be observed from on the
dome cover within 30 minutes.
VIVOTEK
User's Manual - 9