Vivotek SD8333-E User Manual page 188

VIVOTEK
priority
delay
trigger
triggerstatus
exttriggerstatus
exttriggerstatus1
exttriggerstatus2
exttriggerstatus3
di
mdwin
mdwin0
valevel
valevel0
188 - User's Manual
0, 1, 2 1
1~999 10
boot, boot
di,
motion,
seq,
recnotify,
volalarm,
vi
vadp
String[40] trigger
String[40] <blank>
String[40] <blank>
String[40] <blank>
String[40] <blank>
0~15 1
0~7 0
0~7 0
<boolean> 0
<boolean> 0
6/6 Indicate the priority of this event:
"0" = low priority
"1" = normal priority
"2" = high priority
6/6 Delay in seconds before detecting the
next event.
6/6 Indicate the trigger condition:
"boot" = System boot
"di"= Digital input
"motion" = Video motion detection
"seq" = Periodic condition
"recnotify" = Recording notification.
"volalarm" = Audio detection.
"vi" = Virtual input.
"vadp" = VADP trigger
6/6 The status for event trigger
6/6 The status for event trigger
6/6 The status for event trigger
6/6 The status for event trigger
6/6 The status for event trigger
6/6 Indicate the source id of di trigger.
This field is required when trigger
condition is "di".
One bit represents one digital input. The
LSB indicates DI 0.
6/6 Indicate the source window id of motion
detection.
This field is required when trigger
condition is "md".
One bit represents one window.
The LSB indicates the 1
For example, to detect the 1
windows, set mdwin as 5.
6/6 Similar to mdwin. The parameter takes
effect when profile 1 of motion detection
is enabled.
6/6 Enable/Disable audio detect.
6/6 Enable/Disable audio detect profile.
st
window.
st rd
and 3