Vivotek SD8333-E User Manual page 8

Speed dome network camera
Hide thumbs Also See for SD8333-E:
Table of Contents

Advertisement

VIVOTEK
DI/DO Diagram
Please refer to the following illustration for the connection method. Please note that the
maximum load on the DO pins is 50mA.
GND
Camera Power
Input
Output
BJT transistor
IMPORTANT:
1. The camera can be driven by an Ethernet connection to a PoE Plus switch (30W output). You
can connect both the PoE Plus and the 24V power for fail-safe redundancy.
2. If the installation requires heating in the winter (<-5ºC), you require approximately 60 Watts of
power to drive the embedded heater. You can connect either or both of the 24V power lines
or a High Power PoE power injector (separately purchased).
8 - User's Manual
VDC
Switch
+12
VDC
Max.
Relay
GND
Camera Power (DO+ 12V)
Input
Output
BJT transistor
VDC
+12
VDC
Switch
Relay

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sd8333-mSd8333-e/m

Table of Contents