Covering The Roof - Viessmann VITOSOL 200-F Installation Instructions Manual

Slate cover
(cont.)

Covering the roof

1. Match the lead flashing to the con-
tours of the slate and fold over the
outside of both side sections.
2. Slightly lift the lead flashing,
remove the paper backing from the
butyl strip and lightly press down
on the flashing.
34
3. Position the slate up to the centre
edge of the side section; during the
application, press the diagonal
sealing strip slightly against the
collector.
Continue with chapter "installing the
connection set and collector tempera-
ture sensor".