Table of Contents
Advertisement
Internet connection with static IP
Choose this connection type if you are required to use a static IP for the Network Camera.
Please refer to LAN on page 65 for details.
Internet connection via PPPoE (Point-to-Point over Ethernet)
Choose this connection type if you are connected to the Internet via a DSL Line. Please refer to
PPPoE on page 66 for details.
General Connection
1. Connect the Network Camera's Ethernet cable (CAT5e) to a PoE Plus switch.
2. Connect the power wires to an AC 24V power adaptor (user-supplied).
You can connect both power sources for redundancy in power supply.
Power over Ethernet (High Power PoE)
When using a non-PoE switch
Use a PoE Plus power injector (separately purchased) capable of 30W output to connect be-
tween the Network Camera and a non-PoE switch.
IEEE 802.3at PoE Switch (30W output)
and / or
PoE Plus Power
Injector
VIVOTEK
AC 24V 3.5A Adapter
(User-supplied)
Non-PoE Switch
User's Manual - 15
Advertisement
Table of Contents
