Table of Contents
Advertisement
Quick Links
Model Number: OC-1210PS
Recreational Vehicle (RV) and Marine
Fanless 12Volt 10Amp peak (8A constant)
Switched-Mode Microprocessor Controlled
Programmable Automatic Battery
Charger and Power Supply
Dust-proof and water splash-proof to IP64
Australian & New Zealand Standard
AS/NZS 60335.2.29 compliant including
clause 21.102 for vibration and legal use
in caravans and similar vehicles.
You are now the owner of one of the most
advanced, reliable and feature packed
chargers available today.
Please take the time to read and
understand this manual, even though it
may have already been installed for you.
-
1-
Advertisement
Table of Contents
Related Manuals for OzCharge OC-1210PS
Summary of Contents for OzCharge OC-1210PS
- Page 1 Model Number: OC-1210PS Recreational Vehicle (RV) and Marine Fanless 12Volt 10Amp peak (8A constant) Switched-Mode Microprocessor Controlled Programmable Automatic Battery Charger and Power Supply Dust-proof and water splash-proof to IP64 Australian & New Zealand Standard AS/NZS 60335.2.29 compliant including clause 21.102 for vibration and legal use in caravans and similar vehicles.
- Page 2 To reduce risk of damaging the battery, avoid dropping any metal tools onto the battery. Wrap spanners with electrical insulation tape to minimise the risk of a short circuit. Never rest the battery being charged on top of your Ozcharge battery charger or place the charger on top of the battery. ...
- Page 3 CONTROL AND INDICATORS 1. Charge stage indicator LED’s. Shows what the stage of charge mode is. See page 7 for details. The Float/PS LED will automatically come on when used with no battery as a Power Supply (PS). 2. Battery Type button. Allows the user to program the charger for the battery type connected.
- Page 4 6. Temperature Compensation sensor socket. Before any use, connect only the provided sensor. Do not modify the cable in any way. Connect the sensor to one of the battery terminals (preferably the Negative). 7. DC output socket. Anderson 30Amp Power-Pole (PP30) connector. Use the matching cable provided to connect to the battery (preferably via the battery master fuse).
- Page 5 If you don’t have access to permanent AC mains power, consider solar panels and a suitable regulator (such as the Ozcharge OCSR30) to keep the battery fully charged. Keep in mind that all batteries have a certain rate of “self discharge” and will eventually go flat by themselves,...
-
Page 6: Operating Instructions
The charger requires approx 200Watts to run at its full output. Therefore we recommend the smallest generator used to run this charger is 1kVA (1000VA). OPERATING INSTRUCTIONS This Ozcharge battery charger has been designed to be easy to operate and very simple to use. Please refer to the operating instructions below. 1. Pre-Charge Check (a) Check the Battery Electrolyte level (non-sealed batteries). - Page 7 Rejuvenation mode (Patented). Your Ozcharge battery charger provides a unique battery “Rejuvenation” function. What does this feature do? The Rejuvenation mode uses high frequency and high voltage pulses that has been proven to break down the crystalline form of lead sulphate (commonly called “Sulphation”...
-
Page 8: Charger Specifications
If the Authorised Supplier and / or OzCharge service centre concludes that while under normal use, a product failure or malfunction occurred during the warranty period and was caused by a defect in material or workmanship (see Exclusions), the Customer will be asked to ship to the nearest service point for repair or replacement, at our discretion.
Need help?
Do you have a question about the OC-1210PS and is the answer not in the manual?
Questions and answers