Rear Terminal Assembly Removal - HP 3457A Service Manual

Installation
Figure 2-7. Rear Terminal Assembly Removal
I
CAUTION
I
Use clean handling and anti-static techniques when rurnoving, configuring, and rnstall-
ing a Plug-In Asscmbly. Thc circriir boards mrlst bc kcpt clcan to cnsllre con~pliance
with impedance ~pccificatioris. The Pllrg-In Assernhlies as well as the H P 3457A
mainfrurnc conluin CMOS dcvicw /ha/ arc sl~scc~ptihle lo dnrnugc from slutic'
elect ricit y.
2-28. Rear Terminal Assembly Removal
2-29. The Rear Terminal Assembly must be removed before an Optional Plug-In Assembly can be installed.
Remove the Rear Terminal Assembly as follows:
a. Remove the power cord and all external input connections from the HP 3457A.
b. Remove the two screws attaching the Terminal Assembly t o the rear panel.
c. Remove the Terminal Assembly and disconnect the attached connector.