Topcom Babytalker 1010 User Manual page 14

TOPCOM Babytalker 1010
21.6 Monitor
You can use the MONITOR feature to check for weaker signals in the current channel.
• Press and hold the
seconds to activate channel monitoring.
• Press the - button
21.7 Channel Scan
CHANNEL SCAN performs searches for active signals in an endless loop from channel 1 to
8 including
21.8 Button Lock
21.9 Display backlight
To activate the backlight of the LCD display press a button briefly.
The LCD backlight will light for 5 seconds.
14
15
- button and the
15
to stop monitoring.
• Press and hold the
briefly to start scanning.
• Release the buttons.
• When an active signal (one of 8 channels) is detected,
CHANNEL SCAN pauses and you will hear the active signal.
• Press the - button
PTT
signal channel.
• Press the - button
• Press the - button
current channel and continue to search for another active
channel
• Press and hold the
BUTTON LOCK mode. The BUTTON LOCK icon is displayed on
the LCD Screen.
• Press and hold the
deactivate BUTTON LOCK
18
- button for simultaneous for 3
19
- button . Press the
20
to communicate through the active
15
to deactivate channel scan.
19
or the - button
22
- button for 3 seconds to activate the
22
- button again for 3 seconds to
15
- button
18
to bypass the
TOPCOM Babytalker 1010