Topcom Babytalker 1010 User Manual page 10

TOPCOM Babytalker 1010
14 Turning the Babytalker 1010 ON/OFF
14.1 Baby unit
14.2 Parent unit
15 Setting the Channel Memory
To have communication between the Baby Unit and the Parent unit they need to be set both
on the same channel memory. 15 Channel Memories are available (See chapter 23).
Any PMR set on the corresponding channel can receive and listen to
the conversation.
15.1 Baby unit
10
To turn ON:
• Set the On/Off switch
will show the current channel or memory location.
To switch OFF
• Set the On/Off switch
display will turn blank.
To turn ON:
• Press and hold the
LCD display will display the current channel.
To switch OFF
• Press and hold the
LCD display will turn blank.
• Press the - button
flashes on the display.
• Press the - button
channel memory.
To disactivate the Channel Memory function, select OF
• The unit will return to standby if no button is pressed within 5
seconds.
3
to the top position (I), the LCD display
3
to the bottom position (O), the LCD
21
- button . The unit will "beep" and the
21
- button . The unit will "beep" and the
6
twice, the current channel memory
8
or the - button
4
to change the
TOPCOM Babytalker 1010