Table of Contents
Advertisement
ADJUSTMENT OF THE MINIMUN OF THE TOP BURNERS
In the minimum position the flame must have a length of about 4 mm and must remain lit
even with a quick turn from the maximum position to that of minimum.
The flame adjustment is done in the following way:
– Turn on the burner
– Turn the tap to the MINIMUM position
– Take off the knob
– With a small flat screwdriver turn the screw inside the tap rod to the correct regulation
(fig. 10.5).
Normally for LPG, tighten up the regulation screw.
Fig. 10.5
29
Hide quick links:
Advertisement
Table of Contents
