Kenwood CK 230 Instructions For Use - Installation Advice page 19

CORRECT REPLACEMENT OF THE
BURNERS
It is very important to check that the
burner flame distributor F and the cap C
has been correctly positioned (see figs.
8.1 - 8.2) - failure to do so can cause a
poor burner flame and/or damage to the
burner and hob.
Check that the electrode "S" (fig. 8.1) is
always clean to ensure trouble-free
sparking.
Fig. 8.3
A
B
Fig. 8.4
TRIPLE RING BURNER
The triple ring burner must be correctly
positioned (see fig. 8.3); the burner rib
must be enter in their logement as
shown by the arrow.
The burner correctly positioned must
not rotate (fig. 8.4).
Then position the cap A and the ring B
(fig. 8.4 - 8.5).
Fig. 8.5
19