Kenwood CK 230 Instructions For Use - Installation Advice page 5

FIRST USE OF THE OVEN
Follow the instructions below:
– Furnish the interior of the oven by placing the wire racks as described in
"Cleaning and maintenance".
– Insert shelves and tray.
– Switch the empty oven on to max to eliminate grease from the heating elements.
See pages 12, 14.
– Let the oven cool down and clean the interior of the oven with a cloth soaked in
water and neutral detergent, then dry carefully.
USEFUL HINTS
After removing the appliance from its packing, make sure of its integrity.
In case of doubt, please contact your supplier or a qualified engineer.
The packing materials (plastic bags, polyfoam, nails, metal strips etc.) must not be left
around in easy reach of children as they may cause serious injury.
– Do not attempt to alter the technical features of the appliance as this may result in
danger to the user.
– Do not carry out any cleaning or maintenance without first disconnecting the appli-
ance from the electric supply.
– Whenever you decide to get rid of this appliance (in case of replacement with a new
one), before scrapping it is recommended to render it inoperative and harmless in
respect of health and antipollution regulations.
Important:
The appliance is designed and approved for domestic use only and should not be
installed in a commercial, semi commercial or communal environment.
Your product will not be guaranteed if installed in any of the above environments
and could affect any third party or public liability insurances you may have.
5