Draytek Vigor 2925 Series User Manual page 211

Note: Settings in this page only applied to LAN port but not WAN port.
Available settings are explained as follows:
Item
Enable
LAN
Wireless LAN (2.4GHz)
Wireless LAN (5GHz)
Subnet
VLAN Tag
Description
Click it to enable VLAN configuration.
P1 – P5 – Check the LAN port(s) to be grouped under the
selected VLAN.
SSID1 – SSID4 – Check the SSID boxes to group them
under the selected VLAN.
SSID1 – SSID4 – Check the SSID boxes to group them
under the selected VLAN.
Choose one of them to make the selected VLAN mapping
to the specified subnet only. For example, LAN1 is
specified for VLAN0. It means that PCs grouped under
VLAN0 can get the IP address(es) that specified by the
subnet.
Enable – Check the box to enable the function of VLAN
with tag.
The router will add specific VLAN number to all packets
on the LAN while sending them out.
Please type the tag value and specify the priority for the
packets sending by LAN.
199
Vigor2925 Series User's Guide