Now look at the factory preprogrammed times
and temperatures shown below. If this program
will suit your needs, simply press
running the factory preset program.
If you want to change the preprogrammed times
and temperatures, do the following.
Determine the heating and cooling times and
temperatures you want to use. Use the following
table to plan your program time periods and
temperatures. You may also want to look at the
sample program table to get an idea of how the
thermostat can be programmed. You may select
up to two heating temperatures (HEAT O for
occupied temperature and HEAT U for unoccu-
to begin
RUN
PRGM
pied temperature), and up to two cooling tem-
peratures (COOL O and COOL U).
To operate properly in the AUTO mode, there
must be a minimum 1
the highest heat temperature and the lowest
cool temperature.
FACTORY PREPROGRAMMING
Heating Program for ALL days of the Week:
PERIOD
TIME
TEMP
Occupied (O)
8:00 AM
Unoccupied (U)
5:00 PM
Cooling Program for ALL days of the Week:
PERIOD
TIME
TEMP
Occupied (O)
8:00 AM
Unoccupied (U)
5:00 PM
NOTE
FAN
DAMPER
70
PRG
Open
64
AUTO
Closed
FAN
DAMPER
78
PRG
Open
82
AUTO
Closed
°
F separation between
19